The user wants me to rewrite the article to improve clarity, flow, and SEO quality, in the same language (English) and roughly the same length. Keep the same facts and meaning — don’t invent new claims. Return ONLY the rewritten article as clean HTML using

,

/

, and

/
• where appropriate. No commentary, no markdown fences.

  The original title: “Best Portable Diesel Fuel Tank: Smart Buying Tips for 2026”

  I need to rewrite the article. It’s a long article about portable diesel fuel tanks. I need to maintain the facts, improve clarity and flow, and keep it roughly the same length. The original is quite comprehensive with many sections.

  Let me structure the rewritten version with proper HTML tags. I should use:
  –

  for main sections
  –

  for subsections
  –

  for paragraphs
  –

  /
  • for lists

    I need to ensure the content is roughly the same length. The original is very long — I’d estimate around 3,000-4,000 words. I need to preserve the facts and meaning.

    Let me organize the article:

    1. Introduction (hook about portable diesel fuel tanks)
    2. What is a Portable Diesel Fuel Tank?
    3. Key Components of Quality Diesel Fuel Tanks (lists)
    4. Why You Need a Portable Diesel Fuel Tank (Time and Cost Savings)
    5. Types of Portable Diesel Fuel Tanks (Steel vs Poly, Capacity Options)
    6. Essential Features to Look For (Safety certifications)
    7. How to Choose the Right Tank (Capacity planning, mobility)
    8. Top Brands and Products (Premium and budget)
    9. Installation and Setup Guidelines
    10. Ventilation and Environmental Compliance
    11. Safety Best Practices (Emergency response, PPE)
    12. Maintenance and Care Tips (Annual servicing, cleaning)
    13. Legal and Regulatory Requirements (Permits, record keeping)
    14. Cost Analysis: Investment and ROI
    15. Common Problems and Solutions (Leaks, cold weather)
    16. Environmental Impact and Sustainability
    17. Buying Checklist
    18. Alternative Storage Solutions
    19. Expert Tips for Maximum Value
    20. Case Studies
    21. Frequently Asked Questions
    22. Conclusion
    23. Additional Resources

    I need to rewrite this all, keeping the facts, but improving clarity and flow. Let me make sure I preserve all the key facts:

    – Industry data: 15% annual increase in demand since 2020
    – Small 50-gallon to 1,000-gallon commercial tanks
    – HDPE or heavy-gauge steel materials
    – EPA regulations, DOT-approved
    – Key components: double-wall, UV-resistant, reinforced corners, DOT-approved
    – Dispensing: 12V or manual pumps, flow meters, auto shut-off, hose reels
    – Safety: emergency venting, grounding, lockable caps, spill containment
    – Construction companies save up to 30% on fuel costs
    – 2024 industry survey: 68% of fleet operators
    – Typical construction site consumes 200-300 gallons weekly
    – Bulk fuel saves $0.40-$0.75 per gallon
    – Annual savings $4,000-$11,000 for medium-sized operation
    – Delivery fees $50-$150 per trip, reduce 75%+
    – Steel vs Polyethylene comparison
    – Capacity tiers and price ranges:
    – 50-100 gal: $400-$800
    – 100-300 gal: $800-$2,500
    – 300-500 gal: $2,500-$5,000
    – 500-1,000+ gal: $5,000-$15,000+
    – Secondary containment required for tanks >660 gallons
    – Pumps: 8-15 GPM small, 20-30 GPM commercial
    – UL 142, DOT Specifications, fines up to $10,000 per violation
    – Capacity planning formula: list equipment, calculate daily consumption, multiply by 7, add 25% buffer
    – Example: 3 excavators (30 gal/day each) + 2 generators (10 gal/day each) = 110 gal/day, 770 gal/week, ~960 gal with buffer → 1,000 gal tank
    – Transfer Flow Inc: aluminum tanks, lifetime warranty, $1,200-$8,500
    – JME Tanks: steel, fuel management, $3,000-$12,000
    – Western Global: FlexTank series, $2,000-$6,000
    – Better Built: $600-$2,500
    – RDS Aluminum: max 100 gal, from $450
    – Installation: 500-gallon tank weighs ~3,500 lbs when full
    – Grounding <25 ohms
    – Vent pipes 12 inches above tank tops with flame arresters
    – Indoor: one complete air change every five minutes
    – 50-foot clearances from ignition sources
    – Spill kits: 10% of largest container's capacity or 500 gallons, whichever greater
    – Small spill 1% trigger investigation
    – ROI: payback 18-24 months; example: $3,500 tank + $800 install = $4,300; annual savings $11,500; payback 4.5 months; 5-year ROI 1,237%
    – Resale value 60-70% after 5 years
    – Pump replacement $200-$800
    – Water separating filters $50-$150
    – Leak repair $150-$3,000
    – Diesel gels below 15°F
    – Insulated wraps $200-$600
    – One gallon diesel contaminates one million gallons of groundwater
    – Fuel efficiency improvement 3-5%
    – Solar pump systems cost $500-$1,200 more
    – Buying checklist items
    – Fuel bladders: 50-5,000 gallons, $500-$3,000
    – Tote tanks: 275-330 gallons
    – Underground tanks $10,000-$50,000
    – Fuel quality testing kits $20-$40 every six months
    – Each additional 25 feet of hose costs $75-$150
    – Bulk buying savings 15-25%
    – Package deals 10-20% discounts
    – Case studies:
    – Johnson Family Farms: Iowa, 2,000-acre, 500-gallon tank, saved $8,400 yearly, $4,200 investment paid off in 6 months
    – Midwest Builders LLC: 300-gallon tanks, 22% productivity improvement, $156,000 additional revenue
    – County Fire Department: 1,000-gallon tanks at 4 stations, $38,000
    – FAQs:
    – Personal use: 50-100 gallons
    – Diesel lasts 6-12 months, stabilizers extend to 12-24 months
    – Legal: EPA permits under 1,100 gallons for most applications
    – Pickup truck mounting: 30-100 gallons
    – Maintenance: monthly visual, quarterly water checks, annual professional, cleaning every 3-5 years, $400-$1,000 annually
    – Cost to fill: 2026 rates $3.80/gallon, 100-gal = $380, 300-gal = $1,140, 500-gal = $1,900
    – Insurance: $200-$600 annually
    – Other fuels: only diesel unless specifically designed
    – Conclusion points
    – Additional resources: EPA, NFPA 30, OSHA, NEC, PEI, API, National Tank Truck Carriers Association
    – Disclaimer

    Okay, I need to rewrite all this in a clear, flowing way. The title should probably be an H1 or just kept as the title. The instructions say “Return ONLY the rewritten article as clean HTML using

    ,

    /

    , and

    /
    • where appropriate.”

      I’ll include the title as an

      or just

      ? The instruction says “Return ONLY the rewritten article” — I think the title should be included as an

      or the article’s first heading. Actually, since they asked to use

      ,

      /

      , and

      /
      • , I could use an
        

        for the title or just keep it at the top. Let me use

        for the title, then

        for sections.

        Actually, re-reading the instruction: “using

        ,

        /

        , and

        /
        • where appropriate” — it doesn’t mention
          

          . But a title tag would make sense. I’ll use

          for the title since it’s the article title, and that’s clean HTML. Or maybe I should just start with the title as an h1. Let me use

          for the title.

          Let me now write the rewritten article. I